Lyngdorf MH2 Speakers and BW2 High Bandwidth Subwoofer

 

The Lyngdorf MH2 Speakers and BW2 High Bandwidth Subwoofer are Setting new standards for performance from  compact design.

AUDIOPHILE SATELLITE SPEAKER
The MH-2 is designed with a focus on discretion and exceptional performance. Available in high-gloss black or matte white—it has been designed for optimal dynamic performance combined with genuine musicality.

INCREDIBLY VERSATILE AND COMPACT
The shallow MH-2 can be placed on furniture, wall mounted, or by using standard aftermarket 100x100mm brackets.

The cabinet is extremely compact and solid, emphasizing our focus on dynamic music reproduction without sacrificing natural timbre. The depth of the cabinet is reduced to a minimum, not only for improving the physical footprint, but also to minimize cabinet contributions.

BUILT TO PLAY LOUD
With its clear and unstressed sound, the MH-2 calls for playing loud and all night. The speaker is designed for high performance through use of a temperature resistant voice coil made from glass fibre and impregnated with polyimide resin, ventilated magnet as well as a copper cap on the magnet. These measures all minimize temperature build-up and distortion.

EVEN BETTER TOGETHER
The MH-2 speakers hold their ground on their own, but they are designed to be complemented by one or more high-end subwoofers. But if you combine them together with our BW-2 high bandwidth subwoofers—along with the TDAI-2170 with built-in RoomPerfect™ and digital crossovers—you will produce a full range system that simply outperforms anything in or above its price range.

The logistics are incredibly simple. Just hook up a pair of MH-2´s and one or two BW-2´s to the TDAI-2170, switch the BW-2 to the “bypass” function, and select the preconfigured speaker setup in the TDAI-2170´s setup menu. Finish it off by running RoomPerfect™. Then sit back and enjoy.

DRIVERS
In order to have an audiophile performance in this extremely small cabinet we have custom designed the 5.25” midrange driver with a magnet 50% stronger than ordinary drivers. This magnet design results in a higher sensitivity and a linear frequency response in this important frequency range. The speaker cone is made from aluminum, which is extremely light and stiff and designed with a single well defined break-up point, which is easy to counteract in the internal filters. The result is natural and detailed sound even at high music levels.

The tweeter is a textile 1” soft dome design, which is chosen for its lightweight design, low noise and linear frequency response which emphasizes musicality. Due to its very compact dimensions, it is mounted very close to the midrange driver for optimizing the vertical dispersion. The wide vertical dispersion means greater flexibility in placing the speakers.

TECHNICAL DETAILS

MH-2 BUY NOW
Description 2-way satellite speaker
Power handling 100 W
Nominal Impedance 4 Ohm
Tweeter 1” textile soft dome
Midrange driver 5,25”
Ø 35mm / 1.4in voice coil
Cone Material: Aluminum
Vented magnet
Frequency Response 100 to 20,000 Hz
Sensitivity 87 dB (2.87V/1m)
Dimensions (H x W x D) 19 x 24 x 9.5 cm
7.5 x 9.5 x 3.7 inches
Weight 3.1 kg / 6.8 lb
Finish High-gloss black or matte white

 

BW-2
THE REFERENCE HIGH BANDWIDTH SUBWOOFER
OPTIMAL PERFORMANCE THROUGH PEERLESS DESIGN

The active BW-2 is designed as a high bandwidth subwoofer with the objective of reproducing music and soundtracks with full dynamics and precision. The minimalistic – ‘form follows function’ design ensures that all resources are focused on the best possible sound reproduction.

The frequency range of the BW-2 goes up to 800 Hz in "bypass" mode, in contrast to traditional subwoofers, which are typically limited to 120 Hz. In other words, this is a driver that follows the signal with extreme precision. It therefore can actually play music and not just the low-end rumble and explosions of an action movie.

EASY TO INTEGRATE
The BW-2 is designed with a focus on discretion. Available in high-gloss black or matte white—allowing for seamless integration in any contemporary interior.

It can be positioned standing upright or on the side in order to fit into the available space. This also makes it the perfect match for any stereo or home cinema system.

REFINED CLASS D POWER
The internal amplifier is our own Class-D design based on our more than 15 years of experience in designing audiophile Class-D amplifiers. With an output of 400 watts it can deliver ample power to control the driver even at extreme levels.

LONG-THROW DRIVER
The custom made 10” long-throw woofer driver features a massive magnet and voice coil to control the frequency response in the compact cabinet. This results in an extremely fast response and high efficiency.

To ensure perfect piston movement of the cone, it is manufactured in deep anodized aluminium. The open basket design allows ventilation below the spider – which, together with the vented pole piece, prevents over and under pressure from causing mechanical losses when the cone is moving.

The driver is positioned off-centre for the driver to be situated as close to the floor and wall as possible. The compact design not only reduces cabinet resonances but it also allows for optimal coupling to the room.

MORE THAN A SUBWOOFER
The BW-2 has two input modes. If you set it to “Line in,” it can be used with conventional amplifiers and processors and has a frequency range from 25 to 200 Hz. As with regular subwoofers, you have control over level, frequency range, and phase adjustment.

If you have a Lyngdorf Audio amplifier, you can bypass the internal filters. Now the frequency range goes up to 800 Hz, and you can use the BW-2 as a boundary woofer to lift the performance of your system to a new level.

EVEN BETTER TOGETHER
Combining the BW-2 with our MH-2 satellite speakers—along with the TDAI-2170 with built-in RoomPerfect™ and digital crossovers—will produce a full range system that simply outperforms anything in or above its price range.

The logistics are incredibly simple. Just hook up the MH-2´s and one or two BW-2´s to the TDAI-2170, switch the BW-2 to the “bypass” function, and select the preconfigured speaker setup in the TDAI-2170´s setup menu. Finish it off by running RoomPerfect™. Then sit back and enjoy.


TECHNICAL DETAILS

BW-2 BUY NOW
Description Active high bandwidth subwoofer
Amplifier 400 watts
Class-D type
Nominal Impedance 4 Ohm
Driver 10” long throw driver (+/- 15mm/0.6 in)
Ø 50mm / 2in voice coil
Cone Material: Deep Anodized aluminum
86oz / 2.4kg vented magnet
Frequency Response 25 to 200 Hz (using line in input)
25 to 800 Hz (using bypass input)
Sensitivity 91dB (2.83V/1 m) sensitivity
Controls Bypass switch
Phase control (0 to -180º)
Level control
X-over frequency (60 to 200 Hz)
Auto on / always on
Connections RCA / analog mono input
Dimensions (H x W x D) 44 x 32.5 x 17.2 cm
17.3 x 12.8 x 6.8 inches
Finish High-gloss black or matte white