The Exposure phono amplifier is a new phono stage with options for MM or MC cartridges. Both are configurable to suit the cartridge being used, in the case of the MC section you can alter both sensitivity (gain) and loading, with the MM board the loading is set at the traditional 47kOhm but gain is variable.
Changing gain or loading requires the movement of jumper links which avoids the potential degradation of switches. The RIAA equalisation and gain stages are fully discrete and based on those found in the range topping MCX series.
Attention has also been paid to power supply refinement with dual regulation for each rail through a combination of IC regulators and hybrid regulators on the phono board itself. Get the finest detail faithfully retrieved from your vinyl records and delivered with the exhilarating and involving musical reality for which Exposure Electronics have become renowned.
Fully discrete RIAA gain and equalization derived from Exposure’s flagship MCX series. Advanced power supply featuring large custom made transformer and high capacity smoothing. Dual regulation for each power supply rail combines IC regulators on the main board and hybrid regulators on the phono board. MM or MC selected by plug-in board. High Quality aluminum casework.
Input Impedance MC adjustable from 100 Ohms to 1,500 Ohms by jumper link. MM 47K Ohms Sensitivity MC 250uV in for 250mV out at 1KHz (adjustable by jumper link). MM 2.5mV in for 250mV out at 1KHz Frequency Response +/-0.25dB from 30Hz to 20KHz, ref. 1KHz, with low frequency roll off below 30Hz Total Harmonic Distortion <0.01% at 1KHz Power Consumption <25VA Mains Supply 110/120V or 220/240V, 50/60Hz (factory set) Dimensions H x W x D : 90mm x 440mm x 300mm Net Weight (unpacked) : 7kg Gross Weight (packed) : 9kg
Turntable sounding a little thin? This unit will add the detail and weight you're missing.