Exposure XMHP Headphone Amplifier
Pairs well with
Exposure XMHP is an award winning high performance headphone amplifier, preamp with hires DAC, and MM phono stage.
Hifi Choice has recommended the XMHP with the highest 5 star rating saying: "There’s a lot to like about the XMHP, but what’s so impressive is that every aspect of this versatile product is done to a high standard. It brings a seamlessness to its performance across the board, which is rare in products of this price. This means that, like its super-mini siblings, it comes highly recommended – headphones or not."
Features:
- Custom-made toroidal power transformer
- High quality all aluminium casework and extruded front panel
- High quality resistors & capacitors used in the signal path
- All discrete audio output stage with high drive capability for low impedance headphones
- 2 pairs of 6.35mm jacks and 2 pairs of XLR sockets allowing 2 pairs of headphones to be used at one time
- Moving magnet phono and two line level inputs
- Two coax (bnc) and two optical inputs and one class 2 USB input with DSD
- Separate pre-amp output
- Remote control
- Three year guarantee
- Available in black or titanium
Specifications:
Analogue Inputs Pre Amplifier Output (input sensitivity / impedance / S/N):
AUX/PH input MM : 2.5mV @ 1KHz, 47K ohms S/N > 73dB
Frequency Response : +/-0.5dB 50Hz-20KHz. High pass roll off -1.5dB @ 20Hz
AUX 2 & AUX 3 input line : 350mV @ 1KHz > 14K ohms output gain x3.75, +11.5dB
Total Harmonic Distortion : <0.005% at 1KHz : @ 1.3V RMS output
Frequency Response : 20Hz - 20KHz +/- 0.5dB
Signal to Noise Ratio ref 1.3V RMS Output : 1KHz >92dB
Channel Separation @ 20KHz : >60dB
Digital Inputs
SPDIF inputs BNC Coax & Optical : 32 - 192KHz @ 16-24 bits
Total Harmonic Distortion : <0.005% at 1KHz @ 1.3V RMS output
Signal to Noise Ratio ref 1.3V RMS Output : 1KHz : >98dB
USB input : Linear PCM 44K1 - 192KHz @ 16-24 bits DSD x64 (DoP) Asynchronous transfer from host
Headphone Output
Output Impedance : < 5 ohms
Maximum Level into 33 ohms load : @ 1KHz & 0.01% THD : 7V RMS (1.5W)
Total Harmonic Distortion : @ 2V output, 1KHz : <0.003% (120mW)
Maximum Level into 330 ohms : @ 1KHz & 0.01% THD : 7.5V RMS (170mW)
Total Harmonic Distortion : @ 2V output, 1KHz : <0.003% (12mW)
Load Impedance total all outputs : 16 ohms minimum
General Specifications
Mains Supply : 110/120V or 220/240V @ 50/60Hz (factory set)
Power Consumption : <15W
Dimensions (WxHxD) : 218mm x 89mm x 363mm (inc knob)
Net Weight (unpacked) : 4kg
Gross Weight (packed) : 5kg
Exposure XMHP Headphone Amplifier
Learn More
Specifications - Features
Technical
• 110W RMS per channel into 8 Ohms
• Six line inputs
• Option to fit an MC or MM phono module OR plug in DAC option
• Bi-wiring compatible
• Separate pre-amp output
• High-quality capacitors used in the signal path • Uniquely tuned short signal and power supply path PCB
• Cascade circuitry utilized for improved power supply immunity
• Fast bipolar transistor output stage for a dynamic and vivid performance
• All aluminum casework and extruded front panel to control resonance and stray electro-magnetic fields
• Remote control
• Three-year guarantee
• Available in black or titanium
Staff Notes
A powerful amp which tests closer to 135 WPC on the bench. On the warmer side of the tone spectrum with rich bottom end. Borders on a tube sound but faster. All speakers sound great with this amp, super friendly on pairings.