Standpoint 8 · Solid-oak tripod

GURU Standpoint 8 Speaker Stand | Solid Oak Tripod

Cut for the Guru 8.
Nothing else.

Hand-made in solid oak, near-wall by design.

Scroll

Availability: Special order, usually ships in 10–21 business days. Contact us at sales@audionation.ca or 613-566-7005 to confirm timing.

The Standpoint 8 is Guru's hand-made solid-oak tripod stand for the Guru 8 bookshelf speaker ($3,190 pair). It's sold as a pair in natural Oak or Dark Grey Oak.

The stand the Guru 8 was voiced on.

The Guru 8 is a small speaker that behaves like a large one — but only when it sits where its engineers intended: at the right height, a few centimetres off the wall, on a platform that gets out of the way. The Standpoint 8 is that platform. A hand-made tripod of solid oak and anodized aluminium, built from three pieces of timber and a single fixing, it holds the Guru 8 at exactly the geometry Stockholm designed around.

A top plate cut for the Guru 8 — and nothing else.

This is what makes it a Standpoint 8 rather than a generic stand: the aluminium top plate is machined to the Guru 8's own 182 × 238 mm footprint, so the speaker sits flush and centred and couples to its isolating feet instead of balancing on an oversized slab. Vibration stays out of the floor; bass stays out of the mud.

Tripod stability, no spikes.

Three points can't rock, so the Standpoint sits dead-level on any floor — no spikes to thread, no metal points to bury in your hardwood. Its compact footprint tucks against the wall, exactly where the Guru 8 is designed to live.

Stockholm minimalism, made by hand.

Solid oak — not veneer — shaped and finished by hand, joined by cleanly machined aluminium. In a room it reads as Scandinavian furniture first and hi-fi second, in natural Oak or a deep Dark Grey Oak. Sold as a pair, with hardware; a few minutes to assemble.

Specifications

Made for Guru 8
Construction Hand-made solid oak legs, anodised aluminium top plate
Top plate Machined to the Guru 8's 182 × 238 mm footprint
Design Three-legged tripod, no spikes
Height 52 cm
Finishes Oak or Dark Grey Oak
Sold as Pair, with hardware ($999)
Availability Special order, usually ships in 10–21 business days

Frequently Asked Questions

Can I use it with the Guru 12 or Q10?

Each Standpoint has a top plate cut for one speaker. For the Guru 12, choose the Standpoint 12. For the Q10, choose the Standpoint Q10.

Will it work on carpet and hardwood?

Yes. Three legs can't rock, so it sits level on any floor, and there are no spikes to mark hardwood.

How close to the wall can it go?

Close. The Guru 8 is designed to sit within 5 cm of the wall behind it, and the tripod's compact footprint lets the stand do the same.

Technical specifications
TypeTripod loudspeaker stand
Made forGuru 8 stand-mount
Top plateMachined to the Guru 8 footprint (182 × 238 mm)
MaterialsSolid oak; anodized aluminium top plate and fixing
ConstructionHand-made — three-piece oak tripod, single fixing
InterfaceCouples to the speaker's isolating feet; no spikes
Height56 cm
Weight4 kg each
FinishesOak, Dark Grey Oak
SuppliedPair, with assembly hardware
Warranty5 years
OriginStockholm, Sweden — hand-made in the EU
Which speaker does the Standpoint 8 fit?
The Guru 8 only. The aluminium top plate is machined to the Guru 8's own 182 x 238 mm footprint, so the speaker sits flush and centred and couples to its isolating feet. The Guru 12 has a different base and its own Standpoint 12.
What is the difference between the two finishes?
Both are solid oak. Oak is the natural, pale finish; Dark Grey Oak is the same timber finished in a deep, muted grey. The wood, joinery and hardware are identical; only the colour changes.
Do I still need spikes or isolation?
No spikes. Isolation is handled at the top plate, between the stand and the speaker, so there is nothing to dig into or mark your floor. Three points cannot rock, so the tripod sits level on any surface.
About the GURU Standpoint 8 Speaker Stand | Solid Oak Tripod

Availability: Special order, usually ships in 10–21 business days. Contact us at sales@audionation.ca or 613-566-7005 to confirm timing.

The Standpoint 8 is Guru's hand-made solid-oak tripod stand for the Guru 8 bookshelf speaker ($3,190 pair). It's sold as a pair in natural Oak or Dark Grey Oak.

The stand the Guru 8 was voiced on.

The Guru 8 is a small speaker that behaves like a large one — but only when it sits where its engineers intended: at the right height, a few centimetres off the wall, on a platform that gets out of the way. The Standpoint 8 is that platform. A hand-made tripod of solid oak and anodized aluminium, built from three pieces of timber and a single fixing, it holds the Guru 8 at exactly the geometry Stockholm designed around.

A top plate cut for the Guru 8 — and nothing else.

This is what makes it a Standpoint 8 rather than a generic stand: the aluminium top plate is machined to the Guru 8's own 182 × 238 mm footprint, so the speaker sits flush and centred and couples to its isolating feet instead of balancing on an oversized slab. Vibration stays out of the floor; bass stays out of the mud.

Tripod stability, no spikes.

Three points can't rock, so the Standpoint sits dead-level on any floor — no spikes to thread, no metal points to bury in your hardwood. Its compact footprint tucks against the wall, exactly where the Guru 8 is designed to live.

Stockholm minimalism, made by hand.

Solid oak — not veneer — shaped and finished by hand, joined by cleanly machined aluminium. In a room it reads as Scandinavian furniture first and hi-fi second, in natural Oak or a deep Dark Grey Oak. Sold as a pair, with hardware; a few minutes to assemble.

Frequently Asked Questions

Can I use it with the Guru 12 or Q10?

Each Standpoint has a top plate cut for one speaker. For the Guru 12, choose the Standpoint 12. For the Q10, choose the Standpoint Q10.

Will it work on carpet and hardwood?

Yes. Three legs can't rock, so it sits level on any floor, and there are no spikes to mark hardwood.

How close to the wall can it go?

Close. The Guru 8 is designed to sit within 5 cm of the wall behind it, and the tripod's compact footprint lets the stand do the same.