Exposure Electronics has built amplifiers in Sussex, England since 1974, and its three full-width integrated amplifiers share the same recipe: Class AB output stages with Toshiba bipolar transistors, custom toroidal transformers, aluminium casework and no gimmicks. The differences are in power, flexibility and refinement. Here is how to choose.

The short answer: buy the 2510 if you play records and want a phono stage included in the price. Buy the 3510 if you want more power, a headphone output, or a DAC or moving-coil phono board. Buy the 5510 if you want Exposure's best: the stepped-resistor volume control, DC-coupled output stage and the most transparency the range offers.

Side by side

2510 3510 5510
Price in Canada $4,299 From $5,899 From $8,999
Power (8 ohms) 75 W per channel 110 W per channel 120 W per channel
Phono stage MM built in as standard Optional MM or MC board ($6,699 fitted) Optional MM or MC board ($9,799 fitted)
DAC No Optional USB DAC board ($7,099 fitted) Optional DAC board, USB to 32-bit/768 kHz plus DSD ($10,199 fitted)
DS Audio optical cartridge board No Optional ($7,499 fitted) Optional ($10,199 fitted)
Headphone output No Yes, front panel No
Volume control Conventional Motorised ALPS potentiometer Stepped resistor-ladder attenuator (~95 dB range)
Output stage Class AB, bipolar Class AB, circuitry derived from the 5010 monoblocks Class AB, DC-coupled with DC servo, four output transistors per channel
Display No No Dimmable OLED
Line inputs 5, plus AV bypass 6 (one configurable as AV bypass) 6
Finishes Black or Titanium Black or Titanium See product page

Exposure 2510: the vinyl-first choice

The 2510 is the way into Exposure, and the only one of the three with a moving-magnet phono stage fitted as standard. Plug in a turntable such as the Exposure 360, add a cartridge and speakers, and you have a complete British vinyl system with nothing else to buy. Its 75 W into 8 ohms (125 W into 4 ohms) comfortably drives most stand-mount and floorstanding speakers in real rooms, including easy loads like the Guru range.

Choose it if: you are vinyl-first, your speakers are of average sensitivity or better, and you don't need a headphone output or a built-in DAC.

Exposure 3510: the all-rounder

The 3510 is the heart of the range and the successor to the long-running 3010. It steps up to 110 W per channel with circuitry derived from Exposure's 5010 monoblocks, adds a front-panel headphone jack (a first for an Exposure integrated), and has one internal slot for an MM phono, MC phono, USB DAC or DS Audio optical board. You pay only for the module you need. It earned StereoNET's Applause Award, and it partners the matching 3510 top-loading CD player.

Choose it if: you want more headroom, a headphone output, a moving-coil cartridge, or a DAC built in.

Exposure 5510: the flagship

The 5510 is the most advanced integrated amplifier Exposure has built. The headline change is the volume control: a stepped resistor-ladder attenuator of the kind found in cost-no-object preamplifiers, with precise channel matching across a ~95 dB range. The DC-coupled output stage, borrowed from the 3510 monoblocks, removes a large capacitor from the signal path, and four Toshiba output transistors per channel deliver 120 W into 8 ohms with reserves for low-impedance speakers. It drops the headphone output in favour of pure amplification, and adds a dimmable OLED display.

Choose it if: you want Exposure's most transparent amplifier and plan to build a long-term system around it, with demanding speakers such as the Guru 28.

Which speakers suit each one?

These are starting points, not rules. Any of the three will drive most speakers in a normal living room. Tell us about your room and speakers and we'll recommend the right one.

Frequently Asked Questions

Which Exposure amplifier has a phono stage built in?
Only the 2510 includes a moving-magnet phono stage as standard. The 3510 and 5510 take an optional MM or MC phono board in their module slot.

Which Exposure integrated amplifier has a headphone output?
The 3510. The 2510 and 5510 do not have one.

Can I add a DAC to an Exposure integrated amplifier?
Yes, on the 3510 and 5510, via an optional DAC board in the module slot. The 2510 does not take a DAC board. For a compact amplifier with a DAC built in, see the Exposure XM5.

Is the 5510 worth the extra over the 3510?
If transparency and long-term system building are the priority, the stepped-resistor volume control and DC-coupled output stage are real upgrades. If you want a headphone output, or the best value per watt, the 3510 is the sweet spot of the range.

Where are Exposure amplifiers made, and who supports them in Canada?
All three are hand-built in England. Audionation is the exclusive Canadian distributor for Exposure Electronics, so you can buy direct from us or from an authorized Audionation dealer with full Canadian support. Browse the full Exposure range.

More from Notebook

View all

  • by Audionation

Building a Complete Unitra System: Three Matched Setups

Three complete Unitra hi-fi systems, from an all-in-one vinyl starter to the dual-mono flagship, with what each component does and Canadian prices.

Read moreabout Building a Complete Unitra System: Three Matched Setups

  • by Audionation

Which Guru Speaker Is Right for Your Room? Q10, 8, 12, 20 and 28 Compared

Guru's five loudspeakers compared: size, bass extension, room size, stands and Canadian prices, plus why every Guru is designed to sit close to the wall.

Read moreabout Which Guru Speaker Is Right for Your Room? Q10, 8, 12, 20 and 28 Compared

  • by Audionation

Soulnote A-0 vs A-1 vs A-2: Which Soulnote Integrated Amplifier?

Soulnote's three integrated amplifiers below the flagship A3 compared: power, design, features, Canadian prices and which speakers suit each.

Read moreabout Soulnote A-0 vs A-1 vs A-2: Which Soulnote Integrated Amplifier?